Fabricante de mazos de cables personalizados de primera calidad

Asistencia en el diseño, desde la creación de prototipos hasta la producción en serie. Soluciones integrales que incluyen prensado, soldadura, soldadura por ultrasonidos, corte, marcado y mucho más.

Specify labels, branch dimensions, wire gauge, conductor count, insulation and colors in the drawing. Agree the inspection and electrical test plan, including acceptance limits and required records, before release.

Soluciones personalizadas para entornos corrosivos, húmedos, polvorientos y de altas temperaturas.

Diversas opciones de conectores, como AMP, Molex, JST, Yazaki, THB, HL, etc.

Múltiples materiales de recubrimiento disponibles: PVC, tubo termorretráctil, XLPE, silicona, caucho, nailon, malla trenzada, etc.

Longitudes de cable adaptadas a los requisitos de carga eléctrica. Múltiples calibres de cable disponibles de 30 AWG a 0 AWG en función de la corriente, la aplicación de diseño y el entorno operativo.

Identify applicable quality-system, material, product-safety and restricted-substance requirements separately. Supporting certificates and test reports are To be confirmed for the quoted configuration.

At JinHai, we define MOQ based on different harness types. Below are JinHai’s internal minimum order quantities:

Arneses sencillos (arneses internos de electrónica de consumo o pequeños electrodomésticos)

MOQ: 500-2000 piezas;

Arneses moderadamente complejos (arneses industriales, arneses de maquinaria agrícola, arneses de automoción de baja tensión)

MOQ: 1.000-5.000 piezas;

Mazos de cables muy complejos (por ejemplo, mazos de cables del motor, mazos de cables del chasis, mazos de cables del panel de instrumentos)

MOQ: 5.000+ piezas

Arneses totalmente personalizados

JinHai determina el MOQ basándose en consideraciones de complejidad y coste: 2.000-5.000 piezas;

En cuanto a los ciclos de pedido, JinHai will clearly communicate order quantities and determine lead times based on order volume. Below are JinHai’s typical lead times for different order quantities:

Small-batch custom orders (100–500 pieces): Due to lower volumes and the need to procure many raw materials on a spot basis, pre-production preparation takes longer. Lead times typically range from 2 to 5 weeks. • Large-volume custom orders (over 1,000 units): Due to the large order quantity and significant raw material requirements, some materials are sourced from distributors. This may necessitate adjusting allocation ratios or require factory time for verification. Therefore, the typical production cycle ranges from 8 to 20 weeks. Additionally, the cycle may extend due to special circumstances (e.g., shipping weather conditions, tariff fluctuations).

Incoming Material Inspection • Wires and terminals are sampled and tested based on the supplier’s shipping report to verify wire strand count, wire diameter, color, terminal plating thickness, and dimensions. Connectors are sampled and tested for dimensional compliance against official drawings.

Wire Cutting/Crimping Process: Initial, patrol, and final inspections are conducted per CP requirements. Patrol inspections occur at a frequency of 2 hours per shift. • Pre-assembly Process: Insertion follows the “insert, listen twice, pull back” procedure. • Assembly Process: First, verify seal installation. Second, confirm secondary locking of connectors and primary locking of terminals.

Use the approved drawing, bill of materials and circuit list to define dimensional, visual and electrical inspections. Agree sampling or full-inspection coverage, test limits, lot or serial identification, and the records required for shipment.

A cada arnés se le asigna un número de serie de etiqueta único, rastreable a través del sistema de etiquetado. Esto permite identificar rápidamente el origen y aislar los productos problemáticos en caso de problema.

JinHai ofrece múltiples opciones logísticas:

International Express Delivery: Ideal for sample shipments. Couriers assist with customs clearance. JinHai currently partners with DHL, TNT, and EMS. • International Air Freight: Suitable for small-batch product deliveries. Offers faster transit times than sea or rail freight with high security. • International Sea Freight: The most prevalent shipping method in international trade, suitable for bulk order shipments with flexible containerization options. • International Rail Transport: Also suitable for bulk order shipments, primarily serving the China-Europe corridor.

Incoming Material Inspection • Wires and terminals are sampled and tested based on the supplier’s shipping report to verify wire strand count, wire diameter, color, terminal plating thickness, and dimensions. Connectors are sampled and tested for dimensional compliance against official drawings.

Wire Cutting/Crimping Process: Initial, patrol, and final inspections are conducted per CP requirements. Patrol inspections occur at a frequency of 2 hours per shift. • Pre-assembly Process: Insertion follows the “insert, listen twice, pull back” procedure. • Assembly Process: First, verify seal installation. Second, confirm secondary locking of connectors and primary locking of terminals.

Use the approved drawing, bill of materials and circuit list to define dimensional, visual and electrical inspections. Agree sampling or full-inspection coverage, test limits, lot or serial identification, and the records required for shipment.

A cada arnés se le asigna un número de serie de etiqueta único, rastreable a través del sistema de etiquetado. Esto permite identificar rápidamente el origen y aislar los productos problemáticos en caso de problema.